(We suggest that you print these instructions and check off each step as you complete them.)

Network Database Configuration

Setting up M/Docs II as a Network Install is done in three steps:

A. Configure Server

B. Configure Users

C. Configure Workstation

Click on the buttons below for Click-by-Click instructions. We recommend that you open or print the directions and use the check boxes to mark your progress. More detailed directions can be found in the M/Docs II Configuration Editor (see the end of this page for more information).
 

 A. Configure Server

This must be done on the computer that will house the the M/Docs II databases. Click on the button below for a PDF containing directions:

 

 B. Configure Users

This too, must be done on the computer that will house the the M/Docs II databases. Click on the button below for a PDF containing directions:

 

 C. Configure Workstation

This must be done on each workstation that will connect to the networked databases. Click on the button below for a PDF containing directions:

 

D. Importing the User Database

For directions on importing your User Database(s), click on the link below:

Network Install - Importing the User Database


More detailed directions regarding the setup of a Network Install can be found in the Help menu of the M/Docs II Configuration Editor:

1. Click on the Start button.

 2. Click on All Programs.

 3. Click on the Miller Davis Company folder.

 4. Click on the MDocs II 3.0 folder.

 5. Click on MDocsII Configuration Editor.

 6. Click on the Help menu at the top of the window.

 7. Click on Configuration Help.

The Configuration Help directions are split into three distinct groups: Configure ServerConfigure Users and Configure Workstation. We encourage you to print these directions.